|
Le
Tigre
|
|
1 Le
Tigre?
|
(Similar
to early Conway Stewart Duro No 1 Pen)
Black chased hard rubber, very slightly domed cap top, with round
stepped fixed clip, no bands but machined groove 4mm from cap lip.
Flange lever with Le Tigre logo. Large Le Tigre 1st Quality 14ct Nib.
Dimensions - length: 15cm; barrel + section: 11.2cm; cap: 7.4cm.
|
|
The
Conway Pen
|
(1942) flanged clip, shallow domed top, 1 proud narrow cap band, CS
nib. Dimensions - length: 14.2 cm; barrel + section: 11.1cm;
cap: 6.4cm.
|
|
1
Le Tigre (Pencil)
|
Pencil.
Flared
plain top, 2 bands at opposite ends of barrel, no clip with GP point
cone.
Propel-repel , cone operated. Dimensions - length: 9.7cm
|
|
5
"Lyceum" Pen RK
|
(Similar
to early Conway Stewart Scribe 330) no clip, no bands, round shield
on lever, j bar, warranted nib. Cap screws onto bottom of barrel.
Dimensions - length:
13.5cm; barrel + section: 10.5cm; cap: 6cm.
|
| 8
Le Tigre
|
Black
chased hard rubber, very slightly domed cap top, with side entryfixed
ball clip, no band. Boxed lever with Le Tigre logo. Large
Le Tigre 8 Nib.
Dimensions
- length: 13.8cm; barrel + section: 11.1cm; cap: 5.9cm. |
|
10
Le Tigre "Baby"
|
|
|
11M
Le Tigre
|
|
|
13
Le Tigre
|
Black
chased hard rubber, domed cap top, early side entry GP ball clip,
no band. Early concave section. Unusual boxed lever with large
end and Le Tigre logo. Le
Tigre 1st Quality 14ct Nib.
Dimensions
- length: 14cm; barrel + section: 11.1cm; cap: 5.9cm. |
|
15
Le Tigre
|
(Identical to Conway Stewart 800), PF, GPT, peaked cap, diamond clip,
1 band.
Top section of barrel transparent. Dimensions - length: 13.1
cm; barrel + section: 10.6cm; cap: 6.2cm.
|
|
18
Le Tigre
|
(Similiar
to Conway Stewart Duro 26). Black flat top, ball clip with Le Tigre
inscription, 2 narrow 1 medium band, GP CS lever.
Barrel marked " Le Tigre" with logo of laurel ring containing
tiger's head and "1918" on same line with "No 18"
below.
Nib Le Tigre 8. Dimensions - Length: 13.4cm; barrel + section:
10.4cm; cap: 6.2cm.
|
|
21B
"The Mascot" RK
|
Large
RK logo on GP flanged lever, no cap band, GP ball clip with RK logo,
barrel marked "The Mascot" with 3 tigers logo, warranted
nib,
for Rene Kintz. Dimensions
- length: 11.2cm; barrel + section: 8.6cm; cap: 5.7cm.
(
Barrel same as Grenville, cap different. Barrel is marked "Pat
No 235447 and Made in England, identifying it as almost certainly
having been made by Conway Stewart)
|
|
22
Le Tigre
|
(Identical
to Conway Stewart 700) peaked cap, diamond clip, screw section, no
bands, PF, nib CS 1. Hatched
barrel, semi-transparent. Dimensions
- 12.7cm; barrel + section: 10.5cm; cap: 5.5cm.
|
|
23
Le Tigre (Pencil)
|
(Identical
to Conway Stewart 33 pencil) Black conical screw fiited GP diamond
clip with CS logo, 3 GP bands in middle, with GP point cone. Propel
& Repel, top operated. Dimensions - length: 13cm |
|
29
Le Tigre
|
Black
chased hard rubber Eyedropper, very slightly domed cap top, no clip,
no band. Le
Tigre 1st Quality 14ct Nib. Dimensions
- length: 12cm; barrel + section: 8.3cm; cap: 5cm. |
|
31
"The Mascot"
|
(Identical
to early model Conway Stewart 475) diamond clip with Le Tigre logo,
flat top, no bands and round CS shield on lever, GPT. Barrel marked
"The Mascot" and "Fabrication Le Tigre" with
Mascot logo (3 Tigresses holding bar aloft) and "No 31"
on separate line . Also marked "Made in England" round
end of barrel. Nib Le Tigre 2. Dimensions - length: 13cm;
barrel + section: 10.4cm; cap: 5.8cm.
|
|
31N
"The Mascot"
31NM
"The Mascot"
|
(Similar
to ?) diamond clip with Le Tigre logo, peak top, no bands and diamond
CS shield on lever, CPT. Barrel marked "The Mascot" and
"Fabrication Le Tigre" with Mascot logo (3 Tigresses holding
bar aloft) and "No 31N" on separate line . Also marked "Made
in England" round end of barrel. Warranted nib. Dimensions
- length: 12.1cm; barrel + section: 9.9cm; cap: 5.5cm.
|
|
36
Le Tigre
|
|
|
40
Le Tigre (Pencil)
|
(Identical
to Conway Stewart 2R pencil without ring) Tapered black peaked
top , 2 bands beneath, with GP point cone. Propel & Repel, top
operated. Dimensions - length: 10.5cm |
|
41
Le Tigre (Pencil)
|
(Identical
to Conway Stewart 25 Pencil) Brass
conical screw fitted GP diamond clip, 1 band in middle, with GP point
cone.
Propel & Repel, top operated. Dimensions - length: 10.9cm
|
|
45
Le Tigre
|
(Identical
to Conway Stewart 45) Diamond clip, 1 narrow band, peaked top. Barrel
marked "Le Tigre" flanked by two outward facing tiger's
heads and below "Made by Conway Stewart London" and below
that "No 45".
Le Tigre nib,
|
|
52
Le Tigre
|
(Identical
to Conway Stewart Pixie 393) (? - 1933) Shallow domed top, 1 medium
GP cap band, large Le Tigre logo on flanged lever, Le Tigre nib.
Dimensions - length: 13.4cm; barrel + section: 10.8 cm; cap: 5.9 cm.
|
|
55
Le Tigre
|
(Similar
to Conway Stewart 226 or 475) Diamond clip, peaked top, no bands,
round shield on lever. Barrel marked " Le Tigre" with logo
of laurel ring containing tiger's head and "No 55" on same
line . Also marked "Made in England" round end of barrel.
Nib CS 3. Dimensions - length: 12.7cm; barrel + section: 10.2cm; cap:
5.8cm.
|
|
57
Le Tigre
|
(Identical
to Conway Stewart 57) Pressac, 1 medium band, diamond clip, self-colour
pull-off cap with stud, and tapered section, nib Le Tigre 7.
Barrel marked "Le Tigre" flanked by two outward facing tiger's
heads and below "Made by Conway Stewart London 57".
Dimensions - length: 14.1cm; barrel + section: 11 cm; cap: 6.5cm.
|
|
60M
"Lyceum" Pen RK
|
(Similar to Conway Stewart No. 353) Shallow
domed top, no bands, large round logo on long lever, warranted nib.
Dimensions - length: 13.4cm; barrel + section: 10.7cm; cap: 5.9cm.
(Barrel marked "Lyceum" Pen and Made in England)
|
|
61
"Lyceum" Pen RK
|
(Identical
to International No 356), Slightly tapered, slightly domed-top, ball clip
with RK logo, no bands. "Lyceum Pen" on first line, "Fabrication
Le Tigre" on second line, "Made in England" across
barrel next to lever end, small CS logo on large end lever, nib warranted
1A, CPT. Dimensions - length: 13cm; barrel + section: 10.7cm;
cap: 5.9cm.
|
|
63
Le Tigre
|
(Identical
to Conway Stewart 15, long model).
Barrel marked "Made by Conway Stewart London",
no cap band, CPT, Le Tigre nib, round shield on lever, J pressure
bar, black plastic stud.
Barrel marked "Le Tigre" flanked by two outward facing tiger's
heads and below "Made by Conway Stewart London" and below
that "63".
Dimensions - Length 12.9cm; barrel + section: 9.9cm; cap:5.9cm.
|
|
71"The
Mascot"
|
(Similar to Conway Stewart No. 452)
Barrel marked "The Mascot" and "Fabrication Le Tigre"
with Mascot logo (3 Tigresses holding bar aloft) and "No 71"
on separate line & "Made in England" round barrel below
end of lever. No band, peaked top, GP ball clip with Le Tigre
logo, GP CS lever, nib ? . Dimensions - length: 13.1cm; barrel + section:
10.6cm; cap: 5.7cm.
|
|
71
Le Tigre
|
(Similar
to Conway Stewart 75, but with more tapered cap top and barrel end).
NP
diamond clip, 1 NP band, diamond shield on NP lever.
Barrel marked "Le Tigre" flanked by two outward facing tiger's
heads and below "Made by Conway Stewart London" and below
that "No 71". Nib
Le Tigre 1. Dimensions- Length: 12.7cm; barrel + section: 9.8cm;
cap: 6cm.
|
|
73
Le Tigre
|
(Identical
to late model Conway Stewart 475) diamond clip with CS logo, peaked
top, no bands and diamond CS shield on lever, GPT.
Barrel marked "Le Tigre" flanked by two outward facing tiger's
heads and below "Made by Conway Stewart London" and below
that "No 73".
Nib Le Tigre 5. Dimensions - length: 13cm; barrel + section: 10.4cm;
cap: 5.8cm.
|
|
75
Le Tigre
|
(Similar
to Conway Stewart 85, excluding cap band), NPT, 1 wide band, diamond
clip, NP stud.
Barrel marked "Le Tigre" flanked by two outward facing tiger's
heads and below "Made by Conway Stewart London" and below
that "No 75".
Le Tigre nib. Dimensions - 12.8cm; barrel + section: 9.8cm; cap: 6cm.
|
|
83
Le Tigre
|
(Identical
to Conway Stewart 85), GPT, 1 narrow band, diamond clip, brass stud.
Barrel marked "Le Tigre" flanked by two outward facing tiger's
heads and below "Made by Conway Stewart London" and below
that "No 83".
Le Tigre nib 3. Dimensions - 12.8cm; barrel + section: 9.8cm; cap:
6cm.
|
|
85
Le Tigre
|
(Similar
to Conway Stewart 85, excluding cap band), 1 wide GP band, diamond
CP clip, GP stud.
Barrel marked "Le Tigre" flanked by two outward facing tiger's
heads and below "Made by Conway Stewart London" and below
that "No 85".
Le Tigre nib. Dimensions - 12.8cm; barrel + section: 9.8cm; cap: 6cm.
|
|
86
Le Tigre
|
(Identical
to Conway Stewart 84), 1 medium band, GPT, nib CS 4.
Barrel marked "Le Tigre" flanked by two outward facing tiger's
heads and below "Made by Conway Stewart London" and below
that "86".
Dimensions - length:
12cm; barrel + section: 8.9cm; cap: 5.5cm.
|
|
100
Le Tigre
|
(Identical
to ?)
black flat top & blind cap, BF, diamond clip, no bands, GPT.
Barrel
marked " Le Tigre" with logo of laurel ring containing tiger's
head and "No 100" on same line . Also marked "Made
in England" & "Pat No 304922, 297194." round end
of barrel. Nib Le Tigre 5.
Dimensions - length: 13.1cm; barrel + section: 10.8cm; cap: 5.7cm.
|
|
102 Le
Tigre
|
(Identical to Conway Stewart No. 759) Barrel marked "Made
by Conway Stewart London", diamond clip, 1 band,
j bar, nib Le Tigre .
Barrel marked "Le Tigre" flanked by two outward facing
tiger's heads and below "Made by Conway Stewart London"
and below that "No 102". Dimensions - length: 13cm; barrel
+ section: 10.4cm; cap: 5.8cm.
|
|
110 Le
Tigre - "Baby"
|
(Identical to Conway Stewart No. 540) Barrel marked "Le
Tigre - Baby" flanked by two outward facing tiger's heads and
below "Made by Conway Stewart London" and below that "No
110". Diamond clip, 1 band,
j bar, nib Le Tigre .
Dimensions - length: 9.7cm; barrel + section: 7.6cm; cap: 4.4cm.
|
|
111
Le Tigre - "Baby"
|
(Identical to Conway Stewart No. 550)
|
|
120 Le
Tigre
|
Early - (Identical to Conway Stewart Duro 20) BF, GPT,
ball clip with Le Tigre logo and marked Le Tigre, 2 bands,
button filler.
Barrel marked " Le Tigre" with logo of laurel ring containing
tiger's head and "1918" on same line with "No 120"
below.
Nib 18ct Le Tigre 20. Dimensions
- length: 13.8cm; barrel + section: 11cm; cap: 6.2cm.
Late
- (Identical to Conway Stewart 100)
Black only, diamond clip, black stud, 2 narrow bands surrounding
1 wide band.
Barrel marked "Le Tigre" flanked by two outward facing
tiger's heads and below "Made by Conway Stewart London"
and below that "No 120". Nib
Le Tigre 20. Dimensions - length: 13.7cm; barrel + section: 10.2cm;
cap: 6.4cm
|
|
132P Le
Tigre
132M
Le Tigre
|
(Identical
to ?) diamond clip with CS logo, flat top, no bands and round CS shield
on lever, GPT. Barrel marked "Le Tigre" with logo of laurel
ring containing tiger's head and "No 132P" on same line
. Also marked "Made in England" round end of barrel.
Nib Le Tigre 2. Dimensions - length: 12.3cm; barrel + section: 9.9cm;
cap: 5.5cm.
|
|
133P Le
Tigre |
Diamond
clip with Le Tigre logo, flat top, 1 narrow band and round CS shield
on lever, GPT. Barrel marked "Le Tigre" with logo of laurel
ring containing tiger's head and "No 133P" on same line
. 14ct nib. Dimensions - length: 11.5cm; barrel + section: 9.1cm;
cap: 5.7cm. |
|
135
Le Tigre
|
|
|
140
Le Tigre
|
(Identical
to Conway Stewart 28) 1 narrow band, diamond clip with CS logo.
Barrel marked "Le Tigre" flanked by two outward facing tiger's
heads and below "Made by Conway Stewart London" and below
that "No 140".
Le Tigre nib. Dimensions - Length: 13cm; barrel + section: 9.7cm;
cap: 6cm.
|
|
142
Le Tigre
|
(Similar to Conway Stewart 226) peaked top, diamond clip, diamond
shield on lever, 1 band, nib ? Dimensions - length: 13cm; barrel
+ section: 10.5cm; cap: 5.7m.
|
|
153
Le Tigre
|
Black chased hard rubber, very slightly domed cap top, with stepped
fixed ball clip with Le Tigre logo, one medium proud band. Flange
lever with Le Tigre logo. Large Le Tigre 1st Quality 14ct Nib. Dimensions
- length: 13.3cm; barrel + section: 10.6cm; cap: 5.9cm.
|
|
155 Le
Tigre
|
(Identical to Conway Stewart No. 24 or 28) Barrel marked "Made
by Conway Stewart London". One
cap band or two cap bands close together, black stud, diamond clip
with CS logo, CS logo on lever.
Barrel marked "Le Tigre" flanked by two outward facing tiger's
heads and below "Made by Conway Stewart London" and below
that "No 155". Nib
Le Tigre 5. Dimensions: Length: 13cm; barrel + section: 9.8cm; cap:
6.2cm.
|
|
160
Le Tigre
|
(Identical
to Conway Stewart No. 27) 1 wide band, black metal clip screw,
diamond clip with CS logo, CS logo on lever.
Barrel marked "Le Tigre" flanked by two outward facing tiger's
heads and below "Made by Conway Stewart London" and below
that "No 160".
Nib Le Tigre 58. Dimensions - length: 13cm; barrel + section: 9.8cm;
cap: 6cm.
|
|
230
Le Tigre
|
(Similar
to Conway Stewart Duro 50 & 56) BF, Flat black top and blind cap,
diamond clip, 2 bands. Barrel marked " Le Tigre" with logo
of laurel ring containing tiger's head and "No 230" on same
line . Nib Le Tigre 30. Dimensions - Length: 11.8cm; barrel + section:
9.2 cm; cap: 5.7cm.
|
|
315
Le Tigre
|
(Identical to Conway Stewart No. 388) Barrel marked "Le
Tigre" flanked by two outward facing tiger's heads and below
"Made by Conway Stewart London" and below that "No
315".
2 narrow bands surrounding
1 medium band, peaked cap, diamond clip with CS logo, CS logo on lever,
nib Le Tigre 5N. Dimensions: Length: 12.7cm; barrel + section: 10cm;
cap: 5.7cm.
|
|
331L
Le Tigre
|
Hooded
nib, piston filler model that bears no external distinguishing features
to identify it as a Conway Stewart manufactured model. However the
piston filler is identical to that used in the Conway Stewart 71,
indicating at least a tentative link with Conway Stewart.
|
|
340
Le Tigre
340M
Le Tigre
|
(Identical to Conway Stewart No. 58)
2 narrow bands surrounding 1 medium band, diamond clip with CS logo.
Barrel marked "Le Tigre" flanked by two outward facing tiger's
heads and below "Made by Conway Stewart London" and below
that "No 340" or "No 340M".
Le Tigre Nib.
Dimensions - length: 13cm; barrel + section: 9.7cm; cap: 6.1cm.
|
|
400
Le Tigre
|
(Similar
to Conway Stewart 58) 1 wide band, black metal clip screw, diamond
clip with CS logo, CS logo on lever.
Barrel marked "Le Tigre" flanked by two outward facing tiger's
heads and below "Made by Conway Stewart London" and below
that "No 400".
Nib Le Tigre 58. Dimensions - length: 13cm; barrel + section: 9.8cm;
cap: 6cm.
|
|
511
Le Tigre
|
Hooded
nib, piston filler model that bears no external distinguishing features
to identify it as a Conway Stewart manufactured model. However the
piston filler is identical to that used in the Conway Stewart 71,
indicating at least a tentative link with Conway Stewart.
|
|
515
Le Tigre
|
Hooded
nib, piston filler model that bears no external distinguishing features
to identify it as a Conway Stewart manufactured model. However the
piston filler is identical to that used in the Conway Stewart 71,
indicating at least a tentative link with Conway Stewart.
|
|
530S
Le Tigre - "Baby"
|
(Identical
to Conway Stewart Dinkie 530S) Flat top, no band, lever with large
end and CS logo, 14ct Le Tigre nib. Dimensions - 9cm; barrel
+ section: 7cm; cap: 4cm.
|
|
582
Le Tigre - "Baby"
|
(Identical
to Conway Stewart Dinkie 582) Shallow domed top, 1 medium cap band,
1 medium barrel band, straight lever, warranted 14ct nib.
Dimensions - 9.2cm; barrel + section: 7cm; cap: 4cm.
|
|
1598 Le
Tigre
|
(Identical
to Conway Stewart No. 106)
Barrel marked "Le Tigre" flanked by two outward facing tiger's
heads and below "Made by Conway Stewart London 1598", GP
diamond clip, 1 medium GP band,
Pressac filler. Dimensions
- length: 13.5 cm; barrel + section: 11.4cm; cap: 6.4cm.
|
|
No
Number
|
(Very
similar to The Conway Stewart 475)
|
